0.5 Bar Heat Exchanger Solar Water Heater , Solar Hot Water Preheater For Water Heating

150L Stainless Steel Copper Coil Pre Heated Solar Water heater Heat Exchanger For Water Heating

Description:

The water runs from the assistant tank into the main tank and then into the vacuum tubes that will ensure the water to be heated by the sun radiation. This heated water will go into the main tank where a heat exchange is done with the fresh water circulating into the copper coil. The fresh water will then be heated before being sent for domestic usage in the houses.Specification:
1. Inner tank: SUS304-2B food grade stainless steel,0.45mm
2.Outer tank: Stainless Steel 202 Or Color Steel
3. Heat insulation layer: Imported PU(thickness: 50-55mm).
4. Vacuum tube:58mm*1800,Three target,1.6mm
5. Frame(Stand):Galvanized steel,1.5mm. 20/25/38/45 degree optional.
6. Necessary: Electrical booster, Assistant tank..

Advantages:
1, A cooper coil is installed inside the tank as the heat exchanger.
When water flows into the cooper coil, it absorbs heat from the water in the
tank, therefore, the water tank is just a heat storage

Features:
1, Can be used at any time to warm the cold water. It can overcome the
shortcoming of traditional solar water heater, such as slow heating rate, long
waiting time.
2, High efficiency: A special heat exchanging mode is adopted to avoid mixed
effect ,so cold water can be heated at any moment
3, Water pressure is same as tap water it can be connected directly to city tap
water system
4, Green and economical .No pollution in working, no cost for hot water
5, Easy operation: automatic water supply ,you can take it easy and enjoy good
time.
6, Fashionable:the appearance is nice and attractive and can fit into the
surroundings properly.

Material:
1, Inner tank :stainless steel SUS304-2B,0.45MM
2, Outer tank :0.4mm thick galvanized steel sheet
3, Bracket:1.6mm thick color steel with electrostatic plastic coating or Aluminum alloy
Heat collector: vacuum tube
1, Size:58x1800mm/47x1500mm
2, Qty:15,20,25,and 30pcs
Insulation layer:
1, Material :Imported polyurethane
2,Thickness:50mm(for maximum 72hours of conservation)
3, Density:42kgs/m3

Capacity:150,200,250 and 300liters
Max working pressure:0.6MPa
3 years international quality guarantee

Competitive Advantage:

1. We get instant clean and pressure hot water from copper coil outlet;

2. Simple structure with very easy installation and pipeline connection;

3. With copper coil exchanger we do not need to locate the solar water heater at the house top;

4. PASSION argon-arc welding and in-house testing ensures a long lasting storage tank without any leakage problem;

5. PASSION makes a high-density integral PU insulation for the tank with heat preservation as long as 72~80 hours;

6. The solar vacuum tube is made of high borosilicate glass with stable performance and no blasting problem for 15 years;

7. The support frame is designed for slope and flat roof installation, aluminum alloy with stainless fastener has no rusty problem;

8. PASSION pre-heat solar water heater can be equipped with assistant tank and electric heater to make an automatic-operating system;

9. We install sample solar water heater for every order before delivery to ensure no mistakes or missing parts for customers.

solar preheat hot water heater

passive solar water heater

0.5 Bar Heat Exchanger Solar Water Heater , Solar Hot Water Preheater For Water Heating Images